Dishwasher not cleaning properly: a checklist
Seven checks to make when plates come out gritty, in order from simplest to most involved.
By the engineers at Sutton Appliance Engineers. Updated November 2026.
Most dishwashers that stop cleaning have not broken. They have gradually blocked.
- Filters: lift out the cylinder and flat mesh in the floor of the machine and scrub them.
- Spray arms: unclip them and clear each jet with a cocktail stick. Shake out any seeds.
- Salt: in hard water the softener needs it whatever the tablet box says.
- Loading: nothing should stop the arms turning or shield the dispenser.
- Programme: quick washes are for lightly soiled loads only.
- Temperature: the machine should finish hot. If the plates are cold, the heater has failed.
- Drain: water left in the sump is washing the next load in dirty water.
If all of that is right and results are still poor, the circulation pump is losing pressure and needs testing.