SuttonAppliance Engineers

Freezer frosting up: seals, drawers and defrost faults

How to tell everyday frost from a fault, and what a frost-free freezer needs to work.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

Snowy frost near the door means moist room air is getting in. Hard ice on the back panel of a frost-free freezer means the defrost system has failed.

Frost near the door

  • Check each drawer is pushed fully home.
  • Inspect the door seal for splits, especially along the bottom.
  • Make sure the freezer is level, so the door swings shut on its own.

Ice on the back panel

A frost-free freezer melts the frost off its cooling coil several times a day using a heater. If the heater, its sensor or the control fails, the coil becomes a block of ice, the fan cannot blow through it and the temperature climbs.

What to do

Emptying the freezer and leaving it off with the door open for 24 hours will clear the ice and restore cooling for a week or two. That proves the diagnosis and gives you time to book a repair.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.