SuttonAppliance Engineers

Fridge not cold enough: checks before you call

Temperature settings, door seals, airflow and thermostats explained simply.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

Put a thermometer in a glass of water on the middle shelf and leave it overnight. It should read between 3 and 5 degrees Celsius.

If it is too warm

  • Check the dial. On most fridges a higher number means colder.
  • Pull food away from the back wall, where the cold plate needs clear air.
  • Do the paper test on the door seal: a sheet of paper shut in the door should be gripped all round.
  • Feel whether the back wall gets cold and wet or frosty. If it stays dry and warm the fridge is not cooling at all.

What usually fails

A thermostat that no longer switches, an air temperature sensor that has drifted, or a seal that has split. All are repairable in your kitchen.

If the compressor at the back is very hot and never stops, or clicks on and off every few minutes, tell us when you ring. We do not replace compressors, and we would sooner say so before a visit than after.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.