SuttonAppliance Engineers

Induction hob not working: pans, codes and power

How induction hobs detect pans, why zones flash and when the fault is in the hob itself.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

An induction hob heats the pan directly using a magnetic field. If it cannot detect a suitable pan, it does nothing, and that accounts for many apparent faults.

Check the pan

Hold a fridge magnet to the base. It should grip firmly. The pan also needs to be big enough to cover most of the zone, with a flat base.

Flashing symbols

A flashing pan symbol means no pan detected. A letter E with a number is a fault code. A flashing H simply means the glass is still hot.

When it is the hob

  • Two zones on the same side both dead: a power board has failed.
  • The whole hob dead: supply, main fuse or control board.
  • Touch controls unresponsive after a spill: dry it, switch off at the wall for a minute and try again.

Power and control boards can be replaced without disturbing the worktop.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.