SuttonAppliance Engineers

Sparks inside a microwave: causes and cures

What makes a microwave arc, how to check the waveguide cover and when to stop using it.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

Stop the microwave as soon as you see sparks. Carrying on can burn through the cavity wall.

The usual causes

  • Metal: foil, a forgotten fork, twist ties or gold-rimmed crockery.
  • A dirty or burnt waveguide cover, the small card-like panel on the side wall of the cavity.
  • Damaged paint, where bare metal is exposed inside the cavity.
  • A worn turntable support that lets the plate tilt against the wall.

The waveguide cover

Food spatter on this panel carbonises and starts to arc. If it is only greasy, wipe it clean. If it has a burn mark or hole it must be replaced before the microwave is used again.

If it still sparks

With clean walls, no metal and a sound cover, continued sparking suggests a fault behind the waveguide that needs an engineer.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.