SuttonAppliance Engineers

Saniflo keeps running or starts on its own

Why a macerator runs when nobody has flushed, and what each pattern means.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

A macerator should run for a few seconds after a flush and then stop. When it does anything else, the pattern is the clue.

Runs every few minutes

Water is getting into the unit. Either a tap, cistern or shower valve is dripping into it, or the non-return valve on the outlet has failed and pumped water is running back down the pipe.

Runs without stopping

The pressure switch has stuck, or the pump is running but not shifting water because of a blockage or scale.

Buzzes without pumping

The motor is trying to turn against jammed blades, or its capacitor has failed.

What to do

Check for a dripping tap or trickling cistern first, since that is easily cured. Otherwise switch the unit off at the spur to protect the motor and book a repair.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.