SuttonAppliance Engineers

Tumble dryer running cold: causes and checks

Why dryers stop heating, what the safety thermostat is telling you and what to check before calling.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

A dryer that tumbles but blows cold has usually protected itself. Every dryer has a safety thermostat that cuts the heater when the air cannot get through, and on most models it does not reset on its own.

Check the airflow

  • Clean the door filter, then wash it under a tap. Softener leaves an invisible film that blocks the mesh.
  • On condenser dryers, pull out the condenser and rinse it through.
  • On heat pump dryers, wash the foam filter at the bottom and let it dry.
  • On vented dryers, check the hose is not crushed or full of fluff.

If it is still cold

The thermostat, the heater element or, on heat pump models, a sensor will need testing with a meter. Resetting a thermostat without finding out why it tripped only delays the next failure.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.