SuttonAppliance Engineers

Dishwasher repairs in Banstead

Dishwasher repairs in Banstead (SM7), carried out in your home by an independent family firm.

Call 0208 462 2111Book online

Engineer testing the control board of an integrated dishwasher

Full-size integrated dishwashers from Miele, Bosch and Siemens are common in Banstead kitchens.

Water in this part of Surrey comes off the chalk, so heaters and spray arms scale quickly if the salt is left to run out. Many 'not cleaning' calls end with a descale and a new set of filters.

We cover Banstead and Nork throughout SM7.

Dishwasher faults we are called to in Banstead

Dishwasher with the fault locations numbered12345
Dishwasher drawing. The numbers match the faults listed alongside.
  1. 1Dishes come out dirty

    Likely cause. Blocked spray arm jets, a tired circulation pump, or no salt.

    What you can check. Hold the spray arms to the light and poke the jets clear. Top up the salt.

    What we do. We test wash pressure and replace the pump, arms or diverter as needed.

  2. 2Tablet still in the dispenser

    Likely cause. The flap is fouled by a tall plate, or the dispenser catch has failed.

    What you can check. Load so that nothing stands in front of the dispenser.

    What we do. We fit a new dispenser if the catch or seal has gone.

  3. 3Standing water after the cycle

    Likely cause. A blocked filter or sump, or a drain pump jammed with glass or a fruit label.

    What you can check. Lift out the filters and rinse them. Check the waste under the sink is clear.

    What we do. We clear the sump and non-return valve and replace the pump if it is damaged.

  4. 4Cold wash and wet plates

    Likely cause. A failed heater or temperature sensor. On many makes the heater is part of the pump.

    What you can check. Open the door mid-cycle. If there is no steam at all the water is not heating.

    What we do. We test the heater circuit and fit a new heater or heat pump unit.

  5. 5Anti-flood has shut it down

    Likely cause. Water has reached the base tray and lifted the float switch.

    What you can check. Switch off and leave it. Tilting the machine only hides the leak.

    What we do. We dry the tray, find the leak that filled it and repair that.

By make

Also in Banstead

Nearby

More about dishwasher repairs

Questions we are asked

Do you charge extra to come to Banstead?

Banstead is inside our normal working area. The engineer finds the fault on the visit and agrees the cost of the repair with you before starting.

Why are my glasses cloudy?

Either limescale film, which salt and rinse aid cure, or etching from soft water and too much detergent, which is permanent.

Do I need salt if my tablets say all in one?

In hard water, yes. The softener inside the machine only works if the salt container is kept filled.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.