Oven repairs in Banstead
We repair ovens throughout Banstead, whatever the make.

We repair many range cookers in Banstead, along with pyrolytic built-in ovens and wide induction hobs.
A fan oven with a working fan and light but no heat has almost certainly lost its element. The part sits behind the back panel and is changed from inside the cavity on most models.
Banstead is over the county boundary in Surrey, on the edge of Banstead Downs, with a busy High Street and quiet residential roads behind it.
Oven faults we are called to in Banstead
1Noisy fan
Likely cause. A dry motor bearing or a fan blade loose on its shaft.
What you can check. Listen for whether the noise stops when the oven is hot.
What we do. We replace the fan motor or secure the blade.
2Fan runs but no heat
Likely cause. The circular fan element has burnt out.
What you can check. Check the clock is set. Many ovens will not heat while the timer shows automatic.
What we do. We fit a new element and test the thermostat and safety cut-out.
3Trips the fuse board
Likely cause. An element leaking to earth, often the base or grill element.
What you can check. Note which function was selected when it tripped.
What we do. We insulation-test each element in turn and replace the one at fault.
4Grill not working
Likely cause. A broken grill element or a worn selector switch.
What you can check. Look for a blister or break on the element.
What we do. We replace the element or the switch feeding it.
5Burns food or cooks slowly
Likely cause. A thermostat or sensor reading wrongly, or a door seal letting heat out.
What you can check. An oven thermometer on the middle shelf will show how far out it is.
What we do. We measure the cavity temperature and replace the thermostat, sensor or seal.
By make
Also in Banstead
Nearby
Questions we are asked
Which days do you visit Banstead?
Engineer visits run Monday to Thursday. Ring 0208 462 2111 with your postcode and we will give you the first available day for Banstead.
Do you repair pyrolytic ovens?
Yes. Door lock and cooling fan faults after a self-clean are the usual calls.
Can I change an oven element myself?
Some people do. It involves live terminals and a safe earth, so we would always suggest having it tested afterwards.