Food waste disposer repairs in Belmont
We repair food waste disposers throughout Belmont, whatever the make.

Dishwashers here are a mix of freestanding machines in older kitchens and integrated ones where the kitchen has been refitted.
Tell us the make and model from the label on the unit, and whether it is worked by a wall switch or an air button on the worktop.
Belmont sits on the rising ground south of Sutton, around its own small station and the shops of Station Road, with the Royal Marsden close by.
Food waste disposer faults we are called to in Belmont
1Rattles loudly
Likely cause. A loose lug, or a foreign object in the chamber.
What you can check. With the power off, look in with a torch and lift objects out with tongs.
What we do. We remove the object and check the grinding ring.
2Leaks from the body
Likely cause. Internal seals or casing have corroded.
What you can check. Put a bowl beneath it and stop using it.
What we do. A leaking body means a new unit. We can supply and fit one.
3Leaks from the sink flange
Likely cause. The mounting seal has dried out or worked loose.
What you can check. Check for water around the top collar.
What we do. We remake the flange with new seals.
4Drains slowly
Likely cause. Grease and food paste in the outlet or trap.
What you can check. Run plenty of cold water while grinding and for fifteen seconds after.
What we do. We clear the outlet pipework and check the fall.
5Hums but will not turn
Likely cause. Bone, fruit stone or cutlery jamming the grinding plate.
What you can check. Switch off. Use the hex key in the socket underneath to work the plate free.
What we do. We free the jam and check the plate, lugs and motor.
By make
Also in Belmont
Nearby
Questions we are asked
How soon can someone look at my food waste disposer in Belmont?
We are in the Belmont area on visit days from Monday to Thursday. Call 0208 462 2111 for the earliest slot, and have the model number to hand.
What should not go in a waste disposer?
Fat, stringy vegetables such as celery, and large bones. Cold water, not hot, should run while it grinds.
Do you repair Maxmatic and Tweeny units?
Yes, along with InSinkErator and most other makes.