Oven doors that drop, stick or will not seal
Hinges, seals and inner glass: what goes wrong with oven doors and which parts can be replaced.
By the engineers at Sutton Appliance Engineers. Updated November 2026.
An oven door is heavy and hangs on two small hinges. Resting a full roasting tin on it or leaning on it to wipe the cavity will bend them in time.
Door drops or does not close flat
The hinges have worn or the receiver slots they sit in have spread. Both can be replaced on almost every make.
Heat or smoke escaping
The rubber or woven seal around the opening has hardened or come unclipped. It simply hooks in at the corners on most ovens.
Glass loose or shattered
Inner glass is held by clips or a top trim and can be replaced. If toughened glass has shattered, do not use the oven until a new panel is fitted.
Door locked shut
On pyrolytic ovens the door locks during self-cleaning and releases only when the cavity has cooled. A lock that stays on after several hours has failed and needs an engineer.