SuttonAppliance Engineers

Electric oven not heating up: what has failed

How to tell a failed fan element from a thermostat or timer fault, and what a repair involves.

By the engineers at Sutton Appliance Engineers. Updated November 2026.

Start with the clock. On many ovens a timer left in automatic mode, shown by a flashing symbol, stops the oven heating altogether. Setting it back to manual cures a surprising number of 'broken' ovens.

Fan and light on, but no heat

This is the fan element nine times in ten. It is a ring around the fan behind the back panel of the cavity. When it fails it often shows a bulge or split.

Heats, but slowly or unevenly

A thermostat or temperature sensor is reading wrongly, or the door seal is letting heat out. An oven thermometer will tell you how far out it is.

Nothing at all

Check the cooker switch and the fuse board. If the supply is sound, a thermal fuse or the clock module has probably failed.

Elements are quick to change, but the terminals are live with the oven connected, so isolate it at the wall first or leave it to us.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.