Hob repairs in Beddington
Home visits for hob faults across Beddington and the rest of SM6 and CR0, Monday to Thursday.

Slot-in gas and dual-fuel cookers are still popular in Beddington, together with built-in single ovens in refitted kitchens.
Please tell us the fuel, the make, and whether the hob sits over an oven or a drawer unit.
The houses are mainly 1930s family homes with practical, middle-sized kitchens. Many have been extended into the side return or garage.
Hob faults we are called to in Beddington
1Induction zone flashes and cuts out
Likely cause. The pan is not being detected, or the zone's power board has failed.
What you can check. Check a magnet sticks firmly to the pan base.
What we do. We test the coil and power module and replace what has failed.
2Touch controls do not respond
Likely cause. Moisture on the glass, a child lock, or a failed control board.
What you can check. Dry the panel and hold the lock symbol for a few seconds.
What we do. We test and replace the touch control module.
3Cracked glass
Likely cause. Impact, or a hot pan lid sucked down on to the surface.
What you can check. Switch the hob off at the wall.
What we do. We check whether replacement glass is available for the model and fit it if it is economic.
4Gas burner will not ignite
Likely cause. A dirty or cracked electrode, or a failed spark generator.
What you can check. Dry the burner and refit the cap squarely.
What we do. We clean, re-gap or replace the ignition parts.
5One zone will not heat
Likely cause. A failed element under the glass, or the switch or relay that feeds it.
What you can check. Try a different pan on the zone and see whether it glows.
What we do. We test the element and its control and replace the failed part.
By make
Also in Beddington
Nearby
Questions we are asked
How soon can someone look at my hob in Beddington?
We are in the Beddington area on visit days from Monday to Thursday. Call 0208 462 2111 for the earliest slot, and have the model number to hand.
Do you repair gas hobs?
Yes, by Gas Safe registered engineers.
Why does my induction hob buzz?
A light hum at high power is normal, especially with thin pans. Loud clicking or a zone that pulses needs checking.