Hob repairs in Hackbridge
An engineer for your hob in Hackbridge: fault found, price agreed, repair done.

Developer kitchens in Hackbridge have a built-in single oven, a ceramic or induction hob and an integrated hood, often with a built-in microwave above.
Please tell us the fuel, the make, and whether the hob sits over an oven or a drawer unit.
The new homes come with a developer-fitted set of integrated appliances, often all one make and all the same age. Older terraces nearby have freestanding machines.
Hob faults we are called to in Hackbridge
1Trips the electrics
Likely cause. A shorted element, or liquid that has got beneath the glass.
What you can check. Leave it isolated.
What we do. We find the short and replace the damaged component.
2Touch controls do not respond
Likely cause. Moisture on the glass, a child lock, or a failed control board.
What you can check. Dry the panel and hold the lock symbol for a few seconds.
What we do. We test and replace the touch control module.
3Gas burner will not ignite
Likely cause. A dirty or cracked electrode, or a failed spark generator.
What you can check. Dry the burner and refit the cap squarely.
What we do. We clean, re-gap or replace the ignition parts.
4Induction zone flashes and cuts out
Likely cause. The pan is not being detected, or the zone's power board has failed.
What you can check. Check a magnet sticks firmly to the pan base.
What we do. We test the coil and power module and replace what has failed.
5Flame goes out on release
Likely cause. A worn thermocouple on that burner.
What you can check. Hold the control down for ten seconds after lighting.
What we do. A Gas Safe engineer replaces the thermocouple.
By make
Also in Hackbridge
Nearby
Questions we are asked
Which days do you visit Hackbridge?
Engineer visits run Monday to Thursday. Ring 0208 462 2111 with your postcode and we will give you the first available day for Hackbridge.
Can I use the other rings while I wait?
Yes, unless the glass is cracked or the electrics have tripped.
Why does my induction hob buzz?
A light hum at high power is normal, especially with thin pans. Loud clicking or a zone that pulses needs checking.