Hob repairs in Cheam
Home visits for hob faults across Cheam and the rest of SM3, Monday to Thursday.

Range cookers and eye-level double ovens are both common in Cheam kitchens, and many households have an induction hob on an island.
Please tell us the fuel, the make, and whether the hob sits over an oven or a drawer unit.
Most homes here are inter-war family houses that have had the kitchen extended at least once. That usually means a full set of built-in appliances and a separate utility room.
Hob faults we are called to in Cheam
1Induction zone flashes and cuts out
Likely cause. The pan is not being detected, or the zone's power board has failed.
What you can check. Check a magnet sticks firmly to the pan base.
What we do. We test the coil and power module and replace what has failed.
2Touch controls do not respond
Likely cause. Moisture on the glass, a child lock, or a failed control board.
What you can check. Dry the panel and hold the lock symbol for a few seconds.
What we do. We test and replace the touch control module.
3Flame goes out on release
Likely cause. A worn thermocouple on that burner.
What you can check. Hold the control down for ten seconds after lighting.
What we do. A Gas Safe engineer replaces the thermocouple.
4Gas burner will not ignite
Likely cause. A dirty or cracked electrode, or a failed spark generator.
What you can check. Dry the burner and refit the cap squarely.
What we do. We clean, re-gap or replace the ignition parts.
5Trips the electrics
Likely cause. A shorted element, or liquid that has got beneath the glass.
What you can check. Leave it isolated.
What we do. We find the short and replace the damaged component.
By make
Also in Cheam
Nearby
Questions we are asked
How soon can someone look at my hob in Cheam?
We are in the Cheam area on visit days from Monday to Thursday. Call 0208 462 2111 for the earliest slot, and have the model number to hand.
Why does my induction hob buzz?
A light hum at high power is normal, especially with thin pans. Loud clicking or a zone that pulses needs checking.
Do you repair gas hobs?
Yes, by Gas Safe registered engineers.