SuttonAppliance Engineers

Hob repairs in Belmont

Home visits for hob faults across Belmont and the rest of SM2, Monday to Thursday.

Call 0208 462 2111Book online

Engineer beside a five-burner gas hob set in a stone worktop

Freestanding and slot-in cookers remain common in Belmont's bungalows, alongside built-under double ovens.

Please tell us the fuel, the make, and whether the hob sits over an oven or a drawer unit.

We visit Belmont and South Sutton across SM2, up to the edge of Banstead Downs.

Hob faults we are called to in Belmont

Hob with the fault locations numbered12345
Hob drawing. The numbers match the faults listed alongside.
  1. 1Induction zone flashes and cuts out

    Likely cause. The pan is not being detected, or the zone's power board has failed.

    What you can check. Check a magnet sticks firmly to the pan base.

    What we do. We test the coil and power module and replace what has failed.

  2. 2Cracked glass

    Likely cause. Impact, or a hot pan lid sucked down on to the surface.

    What you can check. Switch the hob off at the wall.

    What we do. We check whether replacement glass is available for the model and fit it if it is economic.

  3. 3Flame goes out on release

    Likely cause. A worn thermocouple on that burner.

    What you can check. Hold the control down for ten seconds after lighting.

    What we do. A Gas Safe engineer replaces the thermocouple.

  4. 4One zone will not heat

    Likely cause. A failed element under the glass, or the switch or relay that feeds it.

    What you can check. Try a different pan on the zone and see whether it glows.

    What we do. We test the element and its control and replace the failed part.

  5. 5Gas burner will not ignite

    Likely cause. A dirty or cracked electrode, or a failed spark generator.

    What you can check. Dry the burner and refit the cap squarely.

    What we do. We clean, re-gap or replace the ignition parts.

By make

Also in Belmont

Nearby

More about hob repairs

Questions we are asked

How soon can someone look at my hob in Belmont?

We are in the Belmont area on visit days from Monday to Thursday. Call 0208 462 2111 for the earliest slot, and have the model number to hand.

Why does my induction hob buzz?

A light hum at high power is normal, especially with thin pans. Loud clicking or a zone that pulses needs checking.

Can I use the other rings while I wait?

Yes, unless the glass is cracked or the electrics have tripped.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.