SuttonAppliance Engineers

Tumble dryer repairs in Hackbridge

Home visits for tumble dryer faults across Hackbridge and the rest of SM6, Monday to Thursday.

Call 0208 462 2111Book online

Heat pump tumble dryer standing in a utility room

Apartments in Hackbridge nearly all have an integrated washer dryer behind a cabinet door, and the door hinges and fixings take as much strain as the machine.

Tell us which type you have. If there is a water bottle to empty it is a condenser or heat pump dryer. If there is a hose to a window or wall it is vented.

We cover Hackbridge and Beddington Corner in the north of SM6.

Tumble dryer faults we are called to in Hackbridge

Tumble dryer with the fault locations numbered12345
Tumble dryer drawing. The numbers match the faults listed alongside.
  1. 1Runs but stays cold

    Likely cause. A tripped or failed thermostat, or a heater element that has broken.

    What you can check. Clean the door filter and, on condenser models, rinse the condenser unit.

    What we do. We test heater and thermostats, find why it overheated and replace the failed parts.

  2. 2Squeak, rumble or thump

    Likely cause. Worn drum rollers, a dry rear bearing or flattened felt seals.

    What you can check. Note whether the noise is constant or once per turn.

    What we do. We replace bearings, rollers or glides so the drum runs true again.

  3. 3Empty-water light stays on

    Likely cause. A blocked pump or float in the base, so the bottle never fills.

    What you can check. Empty the bottle and check it is pushed fully home.

    What we do. We clear the sump and pump, or replace the pump if it has seized.

  4. 4Drum does not turn

    Likely cause. A snapped drive belt, a seized tension pulley or a failed motor capacitor.

    What you can check. With the dryer off, turn the drum by hand. If it spins with no resistance the belt has gone.

    What we do. We fit a new belt and check pulley and motor while the cabinet is open.

  5. 5Takes hours to dry

    Likely cause. Restricted airflow: a clogged condenser, a blocked heat pump filter or a crushed vent hose.

    What you can check. On heat pump dryers, wash the lower foam filter and let it dry before refitting.

    What we do. We strip and clean the air path and test the humidity sensor.

By make

Also in Hackbridge

Nearby

More about tumble dryer repairs

Questions we are asked

Do you charge extra to come to Hackbridge?

Hackbridge is inside our normal working area. The engineer finds the fault on the visit and agrees the cost of the repair with you before starting.

Why are my clothes still damp at the end?

Sensor programmes stop when the strips read dry. Fabric softener film on the sensors is a common cause.

Do you repair heat pump dryers?

Yes, for fans, pumps, sensors, belts, bearings and control faults. We do not work on the sealed refrigerant circuit.

Book a repair visit

Tell us the make, the model and what the appliance is doing. An engineer visits, finds the fault and agrees the price with you before repairing it.

Visits run Monday to Thursday across Sutton and the surrounding SM postcodes.