Tumble dryer repairs in Banstead
Tumble dryer repairs in Banstead (SM7), carried out in your home by an independent family firm.

Utility rooms in Banstead often hold a large-drum washer and a heat pump dryer, and sometimes a second washing machine.
A dryer that runs cold has normally tripped a safety thermostat because air could not get through it. Finding out why matters as much as resetting it.
Homes here are larger on average than in the borough of Sutton, and kitchens are specified to match, with range cookers, banks of ovens and separate utility rooms.
Tumble dryer faults we are called to in Banstead
1Empty-water light stays on
Likely cause. A blocked pump or float in the base, so the bottle never fills.
What you can check. Empty the bottle and check it is pushed fully home.
What we do. We clear the sump and pump, or replace the pump if it has seized.
2Runs but stays cold
Likely cause. A tripped or failed thermostat, or a heater element that has broken.
What you can check. Clean the door filter and, on condenser models, rinse the condenser unit.
What we do. We test heater and thermostats, find why it overheated and replace the failed parts.
3Door will not stay shut
Likely cause. A broken catch or a worn latch plate.
What you can check. Check nothing is trapped in the seal.
What we do. We fit a new catch and adjust the door.
4Drum does not turn
Likely cause. A snapped drive belt, a seized tension pulley or a failed motor capacitor.
What you can check. With the dryer off, turn the drum by hand. If it spins with no resistance the belt has gone.
What we do. We fit a new belt and check pulley and motor while the cabinet is open.
5Takes hours to dry
Likely cause. Restricted airflow: a clogged condenser, a blocked heat pump filter or a crushed vent hose.
What you can check. On heat pump dryers, wash the lower foam filter and let it dry before refitting.
What we do. We strip and clean the air path and test the humidity sensor.
By make
- Bosch tumble dryers
- Siemens tumble dryers
- Miele tumble dryers
- AEG tumble dryers
- Zanussi tumble dryers
- Electrolux tumble dryers
- Hotpoint tumble dryers
- Indesit tumble dryers
- Whirlpool tumble dryers
- Beko tumble dryers
- Blomberg tumble dryers
- Samsung tumble dryers
- LG tumble dryers
- Hoover tumble dryers
- Candy tumble dryers
- Haier tumble dryers
- Hisense tumble dryers
- Smeg tumble dryers
- Lamona tumble dryers
- CDA tumble dryers
Also in Banstead
Nearby
Questions we are asked
Which days do you visit Banstead?
Engineer visits run Monday to Thursday. Ring 0208 462 2111 with your postcode and we will give you the first available day for Banstead.
Is my dryer part of a safety recall?
Some older Hotpoint, Indesit and Creda dryers were recalled. Check the model on the maker's site. We repair dryers but cannot carry out a manufacturer's recall modification.
How often should the condenser be cleaned?
About once a month under a tap. Heat pump dryers have a foam filter instead, which needs washing every few loads.